Smart switch
The Smartive Wi-Fi smart switch includes several sensors, for example temperature, humidity and a motion sensor, as well as a small speaker and LEDs. With it you do not need to buy sensors: it is enough to install this device in every room instead of a conventional switch. The switch is simple to configure to the mini server, and anything can be controlled with it, whether lighting, dimming or the thermostat.
The LEDs in the switch also indicate the Wi-Fi connection status. In addition, the first few LEDs of the LED strip light in the same way. The LED colour is interpreted as follows:
| Colour | Meaning |
|---|---|
| Red | Not connected to Wi-Fi |
| Blue | Connected to Wi-Fi, cannot reach the server |
To factory-reset the device, press the switch 6 times in a row.
Configuration
- Add the smart switch to a room with the Add new device button. This is a Smartive device, so select the Add Smartive device option.
- After tapping this menu item, Smartive lists the devices detected by the app.
- Select the device you want to calibrate, then in the window that appears select the Wi-Fi network you want to join.
- Enter the Wi-Fi password, then tap OK. Smartive then tries to connect the device to the Wi-Fi network, and if it succeeds, it navigates to the Add device manually screen.
If the app cannot find it this way, you can also connect it from outside the app. The steps are as follows:
- In the list of available Wi-Fi networks, find the smart switch (its name is "SMK-...").
- After you connect, this automatically opens a browser window.
- Here select the Configure new AP menu item, then on the next page select the Wi-Fi network you want to join and enter the Wi-Fi password.
- If the connection was successful, a new page appears in the browser showing various network details.
- After that, in the Smartive app Add new device menu, choose the Add automatically discoverable device option to connect the device to Smartive.